Valhalla Super Massive
Make some space.
ValhallaSupermassive has been designed from the ground up for MASSIVE delays and reverbs. Blow your mind and your music to new levels of consciousness and experience. Get ready for luscious clouds of reverb, otherworldly delays, swelling waves of feedback unlike any you’ve heard before.
All Valhalla plugins are self documenting, so just roll over the controls for the tool tip.
And, it’s FREE! No strings attached. Just click the download links and you’re ready to go.
This is the most powerful Supermassive control, as the different algorithms have very different attack, sustain, and decay characteristics. For more details, head to the ValhallaSupermassive Modes blog post. Supermassive uses a variety of feedback delay networks, where each delay in the structure can be up to 2 seconds long. Combine these long delays with the unique WARP control, and the results range from echoes that slowly fade in, to cascading harmonic echoes, to lush reverbs, onwards to reverbs that decay way over the course of minutes.
This is the most “conventional” of the Supermassive modes. It has a very quick attack time, and a natural exponential decay. With the DENSITY parameter at maximum and WARP at 50% or more, you can get very smooth reverbs from Gemini. Turn down the DENSITY control, and the reverbs will become less dense as they decay away, which is nice for pointillistic effects.
This mode has a relatively fast attack time, and a very lush and long exponential decay. The Hydra mode is very sensitive to the DENSITY parameter. With DENSITY at 0%, Hydra can sound like a fairly simple echo. Turn up the DENSITY, and the echo density rapidly increases towards a complicated reverb/echo structure. The modulation can be very lush in Hydra.
A mode with a slower attack time, a shorter decay time, and a bit of “sustain” to the reverberation. The attack time in Centaurus is tied into the FEEDBACK parameter, with higher feedback values resulting in a faster attack (and longer decay). This slower attack can be used with lower values of WARP to create echoes that slowly fade in and out. Turn up the WARP parameter, and you have a reverb that slowly fades in, and hangs in space for awhile.
A reverb/echo with a VERY long attack time, depending on the setting of FEEDBACK. With FEEDBACK settings less than 70%, Sagittarius will slowly fade in, and fade out over a similar time period. Turn up FEEDBACK higher, and things will fade in more quickly and decay more slowly. Sagittarius can be viewed as having a fair degree of sonic “mass” or inertia: slow to get going, slow to go away. It is perfect for creating echoes that fade in over time, or massive slabs of reverberation with higher WARP values.
Similar to Centaurus, but MORE MASSIVE. Slow attack with a fair amount of predelay, and super long decay times.
A super massive variant of the Sagittarius mode. Very slow attack with a fair amount of predelay, and decay times that can range into thousands of seconds.
A more compact celestial object. Quick attack time, long decay time, and very low echo density. Even with DENSITY at max, Lyra spends a lot more time in the “echo” domain than the “reverb” domain. This can be really nice for spacey echoes that gradually diffuse over time.
A larger version of Lyra. Quick attack time, long decay time, and a medium size bowl of echo density. Useful for pointillistic reverbs, as well as for lush chorus effects.
EQ High Cut
EQ Low Cut
ValhallaSupermassive has been designed to get a lot of sonic complexity with a relatively simple set of controls.
Controls the wet/dry mix of Supermassive. 0% is a completely dry signal, 100% is only the reverb/delay signal, and values in between mix in different amounts of the reverb signal. Click on the MIX label above the control to lock/unlock the MIX control at the last value selected. This is useful when browsing through presets, or for using Supermassive on a send (when you want it set to 100% wet).
Controls the width of the reverb/delay output of Supermassive. 100% is maximum width, 0% is mono, and values less than 0% will reverse the left and right outputs. Some of the Supermassive sounds will spin around your head from left to right; setting WIDTH to -100% will reverse this direction.
Controls the length of the longest delay line in the feedback delay network, in milliseconds. Depending on the MODE and the WARP setting, you may or may not hear audible echoes at this setting. The Delay Sync combo box allow you to choose whether the delay is set in milliseconds, or as a factor of the project’s tempo.
Affects the lengths of the delays in the feedback delay network, relative to the DELAY setting. This can be used to transform a sound from simple echoes, to resonant echoes and smeared repeats, all the way to lush reverbs.
Controls the amount of feedback around the delays in the feedback delay networks. Larger values will result in longer decays. For some of the MODES, the FEEDBACK setting will also affect the initial attack time of the sound (see the Modes blog post for more info).
Controls the perceived number of echoes in the output.
Controls the rate of the delay length modulation, in Hertz. This controls a multi-phase sinusoidal oscillator, for lush chorusing and ensemble effects.
Controls the depth of the delay rate modulation. The depth also varies as a function of the MOD Rate, so you can have faster modulation without getting “out of tune.” A mod depth of 0% will result in a “drier” sound, and will also make some of the WARP artifacts more audible.
Controls the cutoff frequency of a -6 db/oct low pass filter that processes the output of the feedback delay networks. Useful in reducing the amount of high frequencies in the signal.
Controls the cutoff frequency of a -6 db/oct high pass filter that processes the output of the feedback delay networks. Useful in reducing the amount of low frequencies in the signal.
When the name of the active preset is clicked, the Preset menu comes up. This allows you to select, copy, and save presets.
The Valhalla plugins are self-documenting. Move your mouse cursor over a control, and the bottom of the GUI will display text describing what that control does.
Hear it in action
See what people are saying
“Valhalla Supermassive could be the best free reverb/delay plugin you download this year”Read More
“I really want to play and compose with it, not just use it as a color on something finished.”Read More
“"Other-worldly delays, lush reverbs and a vast spectrum of atmospheric goodness, all in a plug-in deep enough to be used as an instrument on its own."”Read More
Current Version: 1.0.0
ValhallaDSP plugins are self documenting. Just roll over the controls to read the tool tip on the bottom left of the plugin.
For each plugin, I also write blog posts (see below) with product overviews, tips and tricks. Here are the blog posts for ValhallaSupermassive:
If you have questions, please head to Support.
- Windows: Windows 7/8/10 (64-bit Windows only)
- Plugin formats: 32-bit VST2.4, 64-bit VST2.4/AAX
- Mac: OSX 10.8/10.9/10.10/10.11, macOS 10.12/10.13/10.14/10.15
- Plugin Formats: 32/64-bit VST2.4/AAX/AU